8 switches switch8.1
Eight switches.
Use
Mostly for an eight-switch state that several boards share on a group channel.
On the device
On connecting, the device announces this type with t= in @$ui and sends @$state whenever its state changes. Apps send commands to <cid>@.
@$name My 8 switches:Living room
@$ui t=switch8.1
@$state s1=1;s2=1;s3=1;s4=1;s5=1;s6=1;s7=1;s8=1
State keys @$state
| Key | Values | Meaning |
|---|---|---|
s1 | 0 / 1 | Switch 1: 1 when on |
s2 | 0 / 1 | Switch 2 |
s3 | 0 / 1 | Switch 3 |
s4 | 0 / 1 | Switch 4 |
s5 | 0 / 1 | Switch 5 |
s6 | 0 / 1 | Switch 6 |
s7 | 0 / 1 | Switch 7 |
s8 | 0 / 1 | Switch 8 |
Commands <cid>@
| Command | Meaning |
|---|---|
s1=1 | Turn switch 1 on |
s1=0 | Turn switch 1 off |
s2=1 | Turn switch 2 on |
s2=0 | Turn switch 2 off |
s3=1 | Turn switch 3 on |
s3=0 | Turn switch 3 off |
s4=1 | Turn switch 4 on |
s4=0 | Turn switch 4 off |
s5=1 | Turn switch 5 on |
s5=0 | Turn switch 5 off |
s6=1 | Turn switch 6 on |
s6=0 | Turn switch 6 off |
s7=1 | Turn switch 7 on |
s7=0 | Turn switch 7 off |
s8=1 | Turn switch 8 on |
s8=0 | Turn switch 8 off |
all=1 | Turn all on |
all=0 | Turn all off |
{v} is the slider or color value. Even for an unknown command the device should send its current state, so the app does not wait.
Implementation notes
- On a group channel, every member sends the same $name and $ui (t=…) so they show as one card.
Default picture
Without v=1 in $ui and a $view, apps use this picture. Its values name the $state keys the picture reads.
{"kind":"relays","keys":["s1","s2","s3","s4","s5","s6","s7","s8"]}
Examples
- iris-group — example page on arduino.iosignal.net
Type file
iosignal/devices/types/switch8.1.json (rev 2) · CDN
The screen labels in the type file are in Korean; apps show them as written.